Showing all 25 results
Addage Corrosion Inhibitor
Packaging Size 50 Ltr and 200 Ltr Color Colorless Packaging Type Can and Barrel Brand Addage Usage/Application Reinforced Steel Bars, Pipelines, Cooling Towers & Boilers State/Form Liquid Product Description
Addage Corrosion Inhibitor is an advanced colorless, alkaline solution made to safeguard metals and steel from rusting. It meets the ASTM standards.
It forms a strong anti-corrosive coating that prevents chloride, sulfate, and salt from attacking the reinforcement bars.
Perfect for pipelines, water storage tanks, and tools. Our Addage corrosion inhibitors work very well in all climates conditions.
A water-soluble, low-dosage, and budget-friendly product that also resists emulsions and foaming.
Our Corrosion Inhibitor is fit for all types of corrosion, bacterial, general, liquid, gas, organic, or inorganic.
Sakshi Chem Sciences Pvt Limited has specifically designed this product to offer protection without any compromise in daily operations. Just add and forget corrosion.
Pricing
A low-cost product that offers protection without compromising the performance of metals. For more information contact us today.
Micro Silica Powder ( Fumecrete 90 )
Brand Addage Form Powder Appearance Gray Powder Usage/Application Commercial Packaging Size 25 Kg Packaging Type Bag Grade Standard Technical Grade Minimum Order Quantity 25 KG Product Description of Micro Silica Powder
Fumecrete 90 is a form of micro silica powder designed to boost the quality of concrete. It helps to increase the flexural, bonding, and compressive strength of concrete.
It also acts as a Corrosion Inhibitor and enhances the life of concrete structures by reinforcing against damage from corrosive effects. Besides this, Fumecrete 90 also improves overall concrete quality by minimizing the risk of Alkali-Silica Reaction (ASR), more commonly known as “Concrete Cancer”.
Fumecrete 90 Micro Silica powder by Sakshi Chem Sciences Pvt Ltd is a mineral admixture made from very fine sold glassy spheres made of Silicon Dioxide (SiO2). It is a fine amorphous silica whose particles are almost 100 times smaller than the average particles of fly ash and cement.
The Fumecrete 90 Micro Silica offers greater strength to the concrete, provides better dispersion to the concrete, and improves the rheology of the concrete by reducing its water-binder ratio.
Application of FUMECRETE 90 (Micro Silica Powder)
Fumecrete 90 Micro Silica by Sakshi Chem Sciences is useful for the following purposes –- Resistance to ASR (Alkali-Silica Reaction) / Concrete Cancer
- Inhibit corrosion of steel reinforcement in concrete
- Give higher flexural, bonding, and compressive strength to concrete
Addage Sodium Lignosulphonate
Appearance Powder Packaging Size 25 Kg Color Light to dark brown Bulk Density 0.45 – 0.65 g/cm³ pH 7.0 – 9.0 Moisture ≤ 6% Packaging Type Bag Brand Addage Usage/Application Concrete water reducer, Plasticizer, Dispersant in dyes and pigments, Ceramic slurry dispersant, Gypsum products State/Form Powder Product Description:
Addage Sodium Lignosulphonate is a multifunctional, water-soluble polymer that is being extensively used in the construction industry.
It functions as an efficient plasticizer and water reducer. It enriches the concrete workability while reducing water demand.
And the yield is a tougher, stronger &durable structure with superior performance. It’s configured retarding properties make it perfect for hot weather concreting, and in the case of long-distance concrete transport.
Works wonders for low to medium concrete grades. So, with Addage Sodium Lingosulphate Lignosulphonate, you get better placement, reliable strength, and smooth handling in every application.
Pricing:
Addage Sodium Lignosulphonate price is dependent on market conditions and quantity. For the latest price and quotes, please click on the button below.
ADDAGE VMA(P)
Brand Addage Form Powder Appearance White Powder Usage/Application Construction Packaging Size 25 Kg Packaging Type Bag Grade Standard Technical Grade Minimum Order Quantity 25 Kg ADDAGE VMA(P) – Viscosity Modifying Admixtures
Addage VMA(P) is a concrete admixture specially made to enhance concrete’s rheological properties. It is a free-flow water-soluble polymer powder known as viscosity modifying admixture which helps in modifying the viscosity of the admixture without altering any other key characteristics like strength and setting time.
Our Addage – Viscosity Modifying Admixtures powder are specially designed to produce dry-mix concrete. This makes the concrete that is super stable and controls bleeding characteristics powerfully. That’s why VMA in concrete admixture increases the concrete resistance to segregation and facilitates placement ability.
The new technology of Self Compacting Concrete (SCC) allows for obtaining compact concrete without vibration and gives a strongly reinforced structure.
This new concrete admixture is a rheological modifier made to create a high water retention capacity of concrete. It enhances the workability of the concrete immensely and wash out resistance. We formulated Addage VMA(P) to be compatible with all types of admixtures, so when you add it to concrete it starts its positive reaction to give concrete a superior stability.
Price
The price of Addage VMA(P) is based on market conditions and the quantity requirement. For the most competitive pricing and quotes, please click the button below to know more.
ADDAGE BONDCOTE 200S (SHUTTERING OIL)
Brand Addage Form Liquid Usage/Application Moulds and Formwork Packaging Size 210 Lt & 50 Lt Packaging Type Barrel, Can Appearance Light Grey Minimum Order Quantity 50 Litre ADDAGE BONDCOTE 200S (SHUTTERING OIL) provide a water repellent interface which protects formwork and ensures an even color and texture of the cast concrete.
Addage Bondcote 200S is one of the finest products of ours due to its solvent-dilutable nature. It assures the cleanest, quickest, and easiest stripping of moulds and formworks. As a result, it offers you the best outcome to get high-quality stain-free concrete. We have made it non-toxic and non-perilous to ensure safety during its application.
200S is one of our budget-friendly products to get water-repellent interfaces to safeguard formwork and ensure the proper texture and colour of cast concrete.
When you apply Addage Bondcote 200S during shuttering, it shows its best feature by preventing the adhesion of the cement matrix to the formwork. Our 200S breathe longer life into concrete, ensuring perfect placement in the construction process. It looks yellow to brown which can be used with steel, timber, aluminum shuttering and other resinous formwork coatings.
Adage Bondcote 200S is a smart choice for streamlining the construction process and extending the lifespan of concrete and castings. With 200S you can minimize labour costs by saving time on shuttering cleaning.
By using Addage Bondcote 200S you can achieve a perfect finish due to its stain-free quality. For best results and flawless finish, carefully coat mould rims to prevent cement adhesion.
Price:
ADDAGE BONDCOTE 200S Shuttering Oil price is dependent on market conditions and quantity. For the latest price and quotes, please click on the button below.
ADDAGE BONDCOTE 200SN (MOULD OIL)
Brand Addage Form Liquid Usage/Application Industrial Packaging Size 210 Lt & 50 Lt Packaging Type Barrel, Can Grade Standard Technical Grade Minimum Order Quantity 50 Lt ADDAGE BONDCOTE 200 SN is an blend of selected mineral oil and non hazardous chemicals, specially formulated to produce release properties which are superior to those of a conventional. This product is supplied as liquid, ready for direct application on site.
ADDAGE BONDCOTE 200 SN is our best in the category and our most-selling shuttering oil. Our R&D team made it especially from high-quality mineral oils and harmless chemicals.
The most special feature of Addage Bondcote 200 SN is that it’s a stain-free solution for a longer mould life and we have made this product suitable to use with all kinds of concrete moulds. Addage Bondcote 200 SN is in liquid form and ready to use solution.
Technically, Addage Bondcote 200SN grants space to the air to escape from the interface during concrete placing and vibration. Thus, when you apply it, it eliminates surface blemishes and offers an even colour & excellent texture to the cast.
You can use Addage Bondcote 200SN with steel, timber, white cement, aluminium shuttering, g.r.p., and other resinous formwork coatings. For better results apply our 200 SN by Clothes.
The coverage rate is the best in the industry, but it mostly depends on the porosity of the mould material. Due to 200 SN’s all-time demand, we have made it affordable for all as we certainly value your dreams.
Price:
Addage BONDCOTE 200 SN price is dependent on market conditions and quantity. For the latest price and quotes, please click on the enquiry button below.
ADDAGE BONDCOTE 900 ASO (PURE OIL)
Brand Addage Form Liquid Appearance Clear Transparent Usage/Application Industrial Packaging Size 210 Lt & 50 Lt Packaging Type Can & Barrel Grade Standard Technical Grade Minimum Order Quantity 50 Lt ADDAGE ASO 900 can be applied by brush or conventional mould oil sprayer. If a mould oil sprayer is used care should be taken to ensure that a fine nozzle is fitted as ADDAGE BONDCOTE 900 ASO should be applied in a light continuous film.
Addage Bondcote 900 ASO is formulated with selected mineral oil and non-hazardous chemicals. It is widely used to produce release properties superior to traditional oils. It provides excellent de-moulding performance with a good surface finish to the moulded product. Releasing the air reduces surface imperfections and significantly lowers repair costs.
By using the Addage Bondcote 900 ASO, you can achieve a stain-free cast while minimizing the cleaning costs after its use. Bondcote 900 ASO is popular for delivering aesthetic finishes by protecting the cement matrix from sticking to the moulds. And it creates space for air to escape during concrete placement, ensuring consistently superior outcomes.
It looks clear in appearance with a coverage range of 25-60 m2/ liter. Using the Bondcote 900 ASO you can definitely prolong the life of shuttering which protects the formworks and ensures an even color and texture of the cast concrete. It is suitable for all types of concrete moulds and formworks and delivers exceptional performance.
Price
Addage Bondcote 900 ASO (Pure Oil) price depends on the market situation and the requirement of quantity. For the updated prices and quotations, please click on the button below.
Polypropylene Fiber (PP Fiber)
Composition: 100% virgin polypropylene Appearance Fibrillated mini bundle Tensile strength: 137 – 689 MPa Packaging Size 20 Kg Fiber Type Monofilament Density 0.91~0.93 g/cm3 Normal length 6mm, 12mm, 20mm Fiber Diameter 25~45um Sakshi Chem Sciences Pvt. Ltd. is the trusted manufacturer, exporter and supplier of 100% virgin PP fiber.
Polypropylene Fiber or PP Fiber is an organic synthetic fiber that is 100 % made of Polypropylene. Due to the complex demands of modern-day construction, PP fiber has become the best choice for builders and engineers.
PP fiber is an effective and simple material that helps in providing enhanced concrete quality, Crack, water & fire resistance. It can bear harsh conditions, improve durability, and cohesion, inhibit water entrance, prevents bleeding, and avoids the formation of bleed holes.
It is cost-effective as reduced labor requirements are there. It provides automatic positioning reinforcement which reduces project cost.
PP fiber helps in giving resilience and a more durable, harder, and rust-free surface. It is compatible with all types of concrete admixtures.
It can be mixed either before after or during the batching of concrete is done. It is easy to use environmentally friendly and biodegradable.
Comparatively, a smaller quantity of dosage helps in achieving superior results. However, it is combustible and will burn if exposed to flames or other ignitions.
Available in sizes such as 6 mm , 12 mm and 20 mm can be used as per project requirements.
Price: .
Our Polypropylene Fiber price is based on market conditions and the quantity requirement. For the best pricing and quotes, please click the button below to connect with us.
ADDAGE TTCI
Attribute Details Packaging Size 25 Kg Form / State Powder Color / Appearance White Packaging Type Bag Brand Addage Usage / Applications Infrastructure projects, Refineries, Metro and Transportation Product Description- Traversing type corrosion inhibitor (TTCI)
Addage Traversing type corrosion inhibitor (TTCI) is a specially formulated product for reinforced concrete surfaces. It approaches the perfectly embedded steel and forms a durable protective layer that can withstand corrosion caused by chloride and carbon.
It is in water-soluble powder form. Addage TTCI has helped in expanding the lifespan of many structures. One of the coastal highway bridges was suffering from chloride-induced corrosion due to constant exposure to sea spray & deicing salts. Addage TTCI was used as a rehabilitation solution. And it got fixed.
This Inhibitor goes deep inside the concrete, reaches the corroded reinforcement, and helps create a protective layer. This prevents further chloride attack, thereby extending the life span of the structure and reducing the repair cost cycle.
So, choose a smarter solution like Addage TTCI for stronger, more reliable long-term concrete.
Pricing
Addage Traversing type corrosion inhibitor (TTCI) Powder price is based on the quantity and market conditions. To know the updated prices, price on the below button.
ADDAGE – DEFOAMER POWDER
Attribute Details Packaging Size 25 Kg Form / State Powder Color / Appearance White to off-white free-flowing powder Packaging Type Bag Brand Addage Usage / Applications Construction chemicals, paints & coatings, wastewater treatment, manufacturing processes Product Description- Defoamer Powder
Addage Defoamer Powder is a powerful, easy-to-use powdered anti-foaming agent designed to keep your mixes smooth and efficient. It works quickly to suppress foam and prevents it from reforming, ensuring consistent results in every application.
Addage Defoamer free-flowing powder offers non-dusting properties, excellent stability, and easy dispersibility in water-based systems. Widely used in construction, decorative products, paints, coatings, textiles, and chemical processing, it improves surface finish, workability, and durability.
Supplied in 25 kg moisture-proof bags, Addage Defoamer Powder is a tested and reliable solution that keeps processes running smoothly and enhances product quality across industries.
Pricing
ADDAGE Defoamer Powder price is based on the quantity and market conditions. To know the updated prices, price on the below button.
ADDAGE – DEFOAMER LIQUID
Attribute Details Packaging Size 200 Kg Form / State Liquid Color / Appearance Hazy liquid Packaging Type Barrels Brand Addage Usage / Applications Construction chemicals, paints & coatings, wastewater treatment, manufacturing processes Product Description- Defoamer Liquid
In industries where smooth processes and flawless finishes matter, foam is more than a nuisance; it’s a barrier to efficiency and quality. Foam can quietly undermine product quality and slow production across many industries.
ADDAGE – Defoamer Liquid from Sakshi Chem Sciences is a ready-to-use, high-performance defoamer that rapidly knocks down foam and prevents reappearance. Suitable for both aqueous and non-aqueous systems, it offers excellent dispersibility plus thermal and pH stability for consistent action during mixing, processing, and application.
Easy to apply with minimal dosage, it protects surface finish, improves process efficiency, and reduces downtime. Supplied in robust 200 kg barrels for safe handling and storage, ADDAGE – Defoamer Liquid is a practical, cost-effective choice for reliable foam control and lasting performance.
PCE POWDER
Form Powder Appearance White Powder Packaging Size 25 Kg Packaging Type Bag Minimum Order Quantity 25 Kg PCE Powder or Polycarboxylate Ether Powder, is a high-performance superplasticizer admixture used in concrete formulations to enhance workability and fluidity of the concrete.
It enables significant water reduction while maintaining or improving strength, making it ideal for high-strength and high-performance concrete applications. PCE Powder is usable with various cements and can improve the durability and longevity of concrete structures.
Its unique chemical structure allows for a tailored adjustment of setting times, making it versatile for different environmental conditions. This eco-friendly additive contributes to reduced carbon emissions by optimizing material use, making it a preferred choice in modern construction practices.
ADDAGE PLAST ES
Brand Addage Form Liquid Uses Construction Packaging Size 60 Kg & 250 Kg Packaging Type Can & Barrel Minimum Order Quantity 60 Kg Product Description
Addage PLAST ES is an advanced concrete admixture by renowned construction chemical brand. It is basically a melamine resin base super-plasticizer for concrete.
PLAST ES by Addage is a high volume water reduction admixture and provides excellent early and final strength to concrete. It also enhances the practical uses of concrete mix and reduces overall water requirement at the same time. This results in creating a concrete with a higher compressive strength and enhanced durability.
Addage PLAST ES effectively reduces water quantity by 20%-30%, depending on the amount used, and still gives extremely functional and workable concrete. Besides, PLAST ES by Addage also decreases the porosity of concrete and modifies its morphology effectively.
Application of Addage PLAST ES
Addage PLAST ES concrete admixture is highly useful for:
- High water reduction
- Improved fluidity / workability
- Higher early strength
- Improved final compressive strength
- Lowest air volume
- Minimized bleeding and segregation
ADDAGE PLAST ESN
Brand Addage Form Liquid Uses Construction Packaging Size 60 Kg & 250 Kg Packaging Type Can & Barrel Minimum Order Quantity 60 Kg Product Description
Addage PLAST ESN is an innovative concrete admixture, which is essentially a naphthalene based super-plasticizer for concrete. It is known for being able to reduce water in admixtures significantly. It is also chosen for giving high early and final compressive strength to the concrete.
PLAST ESN by Addage is quick setting which allows you to quickly remove mould or formwork. Besides, it also enhances the workability of concrete mix by lowering its overall water requirement. This results in creating concrete with a significantly higher compressive strength and enhanced durability.
Addage PLAST ESN works to lower water quantity in concrete admixtures by 20%-30%, without compromising its workability and durability.
Application of Addage PLAST ESN
Addage PLAST ESN is most commonly used worldwide as a next-gen concrete admixture for:
- Higher water reduction
- Improved concrete workability
- High early compressive strength
- Improved final compressive strength
- Quick removal of mould / shuttering
ADDAGE PLAST PCE 811
Brand Addage Form Liquid Appearance Transparent Uses Construction Packaging Size 50 Kg & 200 Kg Packaging Type Can & Barrel Minimum Order Quantity 50 Kg Product Description of PLAST PCE 811
Addage Plast PCE 811 is a high range water reducing, high early strength super-plasticizing admixture for producing pre-case concrete. The product is designed to increase the fluidity or plasticity of concrete and to enhance its compressive strength at the same time.
Plast PCE 811 by Addage from Sakshi Chem Sciences provides better fluidity to concrete without needing much water content and helps achieve high early strength. It produces rheodynamic and rheoplastic concretes with low water-to-cement ratio.
Sakshi Chem Science’s Addage Plast PCE 811 Plasticizer reduces cycle time which results in increased production. It improves surface appearance which gives durable pre-cast concrete products. Using Plast PCE 811 helps provide excellent early strength and workability to concrete by reducing its water consumption.
Applications of Addage Plast PCE 811
Addage Plast PCE 811 is widely used in –
- Low water content concrete production
- Transporting ready mix concrete
- Highly elastic and strong concrete production
- Enhancing durability of concrete
- Producing pumpable concrete
ADDAGE PLAST PCE 816
Brand Addage Form Liquid Appearance Transparent Uses Construction Packaging Size 60 Kg, 250 Kg Packaging Type Can, Barrel Minimum Order Quantity 60 Kg Product Description
The Addage PLAST PCE 816 is a unique high early strength, high level water reducing super-plasticizing precast concrete admixture. It is most useful for enhancing the fluidity and overall strength of concrete.
Addage PLAST PCE 816 is an advanced Polycarboxylic Ether (PCE) which is renowned for its ability to quickly and significantly reduce water content in concrete admixtures. This not only helps to make the concrete more workable, but also provides it with around 20%-30% additional strength.
PLAST PCE 816 by Addage helps optimize curing cycles by decreasing curing time or temperature, this eliminating heat curing.
Application of Addage PLAST PCE 816
Addage PLAST PCE 816 is a new-gen concrete admixture and is widely used for:
- Producing precast concrete items (Super-workable, Rheoplastic, etc.)
- Fast mixing during transport
- Low water content concrete
- High elasticity and strength concrete
- Cold weather concreting
- High fluidity concrete mix
- Enhancing durability of concrete
ADDAGE PLAST PCE 850
Brand Addage Form Liquid Appearance Transparent Uses Construction Packaging Size 50 Kg & 200 Kg Packaging Type Can & Barrel Minimum Order Quantity 50 Kg Product Description of PLAST PCE 850
Addage PLAST PCE 850 is an advanced admixture by the renowned brand. It is basically a high level water reducing and high early strength inducing super-plasticizing admixture specially developed to create strong and durable precast concrete surfaces.
PLAST PCE 850 by Addage is the next-gen product in its wide range of Polycarboxylic Ether (PCE) product portfolio. It effectively lowers water level in concrete and enhances its overall strength by 20%-30%.
Addage PLAST PCE 850 also provides high early strength. It is useful to get consistency in the fluidity and strength of concrete admixtures used in various precast applications. The concrete thus produced is self-compacting without the need of conventional vibration technique for setting.
Application of Addage PLAST PCE 850
Addage PLAST PCE 850 is highly useful for making:
- Low water content concrete
- Ready mix for fast-mixing concrete during transportation
- High elastic and enhanced strength concrete
- Highly strong yet workable concrete
- Enhanced durability concrete
ADDAGE BONDCOTE 300 W (SHUTTERING OIL )
Brand Addage Form Liquid Usage/Application Industrial Packaging Size 200 lt & 50 lt Packaging Type Barrel, Can Appearance Yellow Minimum Order Quantity 50 Liter To provide quick, clean. Easy stripping of moulds and formwork. Ensure high quality fair-faced and stain-free concrete. Extends life of the shuttering.
ADDAGE BONDCOTE 300W is a one-stop solution to use as a shuttering oil, mould release agent and cutting oil. It provides rapid, unstained and effortless stripping of moulds and cast. We have formulated Addage Bondcote 300W from handpicked mineral oils and non-hazardous chemicals to enhance release properties superior to other oils.
The existing chemically reactive compounds in Bondcote 300W ensure a water-repellent interface to protect the cast for a longer term. Our 300W is a secret to consistent concrete finishes as it delivers even colour and texture in every cast.
Our very owned Addage Bondcote 300W has a yellow to dark brown colour which facilitates air release during concrete placement and vibration. Unlike traditional mould oils, Addage Bondcote 300W doesn’t leave lasting residual properties. Therefore, by using it, a great surface finish can be possible to achieve within a specific time.
The coverage rate and form release properties of Bondcote 300W are excellent compared to conventional. It is designed to be applied on steel, timber, G.R.P., and other resinous form coatings.
Price:
Addage Bondcote 300 W (MRA-WD) price is dependent on market conditions and quantity. For the latest price and quotes, please click on the button below.
ADDAGE BONDCOTE 100 C (MRA CP)
Brand Addage Form Liquid Usage/Application Industrial Packaging Size 200 lt & 50 lt Packaging Type Barrel, Can Colour Brown Minimum Order Quantity 50 Liter Addage Bondcote 100 C (MRA CP) is a special shuttering oil designed by us that offers quicker, cleaner, and easiest stripping of moulds and formworks. The chemically reactive components in Addage Bondcote 100 C offer a water-repellent interface that safeguards the molds, ensuring an even color and texture of cast concrete.
We made our Bondcote 100 C (MRA CP) completely affordable and easy to use. It is made of non-hazardous and non-toxic chemical compounds. It prevents the cement matrix from sticking to the molds and facilitates the release of air from the interface during concrete placement and vibration.
Bondcote 100 C (MRA CP) is suitable for all types of concrete moulds and formworks. Additionally, it leaves the casts stain-free and minimizes the cleaning of moulds before reusing them. We are sure that by using Addage Bondcote 100 C (MRA CP) you can extend the life of the shuttering.
Price
Addage Bondcote 100 C (MRA CP) price mostly depends on the market situation and the quantity required. For the updated prices and quotations, click the button below
ADDAGE BONDCOTE CC (WAX BASED)
Brand Addage Form Liquid Appearance White Color Usage/Application Industrial Packaging Size 50 Kg & 215 Kg Packaging Type Can & Barrel Grade Standard Technical Grade Minimum Order Quantity 50 Kg Product Description
Addage BONDCOTE Curing Compound WE (Wax based) is designed to retain moisture in concrete and enables comprehensive curing. It is suitable for several types of conventional concreting purposes. It is especially developed for large surface area applications, such as for roadways, bridges, runways, etc.
BONDCOTE Curing Compound WE (Wax based) by Addage provides a more durable concrete by enhancing cement hydration, thus improving concrete curing. Controlling loss of moisture is necessary for improving the surface quality of concrete. It is also useful for reducing permeability and producing a durable and dust-free surface.
Addage Wax based BONDCOTE Curing Compound WE reduces chances of cracking of surface and shrinking by preventing moisture loss. Besides, it is applied by spray or brush which reduces labor cost and also helps in rapid film formation.
Application of Addage BONDCOTE Curing Compound WE
Addage BONDCOTE Curing Compound WE is highly useful for general concreting applications, such as in:
- Roadways
- Bridgework
- Airport runways
ADDAGE BONDCOTE CCARB ( WATER BASED)
Brand Addage Form Emulsion Appearance White Color Usage/Application Commercial, Industrial Packaging Size 215 KG Packaging Type Barrel Grade Standard Technical Grade Minimum Order Quantity 215 KG Product Description
Addage BONDCOTE CCARB (Curing Compound Aluminium Resin Base) is a water based concrete curing compound. It is created as a low viscosity acrylic emulsion to make it easy to apply and use.
BONDCOTE CCARB by Addage is sprayed directly on the cementitious surface and forms a thin silvery film. It is a uniform and non-penetrated coating that restricts moisture loss, which ensures better cement hydration, improves durability and limits shrinkage.
Addage BONDCOTE CCARB is designed to produce highly durable concrete structures by enhancing the cement’s hydration capabilities. Controlling moisture helps to improve surface quality of concrete, reduce permeability, and give a tough but clean and smooth surface. The product effectively restricts surface cracking and shrinkage by preventing loss of moisture. Besides, BONDCOTE CCARB is safe for use as it is made from non-toxic and non-flammable compounds.
Application of Addage BONDCOTE CCARB (Water-based) Curing Compound
The Addage BONDCOTE CCARB (Curing Compound Aluminium Resin Base) is highly useful for:
- General concreting
- Runways
- Roads
- Bridge-work
ADDAGE BONDCOTE CCARB (SOLVENT BASED)
Brand Addage Form Liquid Appearance White Color Usage/Application Commercial, Industrial Packaging Size 200 Kg Packaging Type Barrel Grade Standard Technical Grade Minimum Order Quantity 200 Kg Product Description of Addage BONDCOTE CCARB
Addage BONDCOTE CCARB (Curing Compound Aluminized Acrylic Resin Based) solvent-based is an acrylic emulsion liquid concrete curing compound by Sakshi Chem Sciences Pvt. Ltd. It is sprayed, or applied by brush, on concrete surfaces to form a thin membrane which helps to retain moisture. It ultimately helps in effectively curing the concrete compound.
BONDCOTE CCARB (Solvent-based) curing compound helps to produce durable concrete by enhancing dehydration. It helps to reduce moisture loss, which ensures better surface quality. It also lowers permeability of the concrete which produces a dust-free, smooth and hard-wearing surfaces.
Addage BONDCOTE CCARB solvent-based curing compound is also beneficial to reduce surface cracking and prevent shrinkage. It is a water-soluble construction compound and hence non-toxic and non-flammable. It is easy to apply by spraying which also reduces labor costs and the need to use alternative curing chemicals.
Applications of Addage BONDCOTE CCARB (Solven-based)
The Addage BONDCOTE CCARB (solvent-based) curing compound is widely used to –
- General concreting
- Runways
- Roads
- Bridge-work
ADDAGE PLAST AP 251
Brand Addage Form Liquid Uses Construction Packaging Size 50 Kg & 220 Kg Packaging Type Can, Barrel Minimum Order Quantity 50 Kg Product Description of Addage Plast AP 251
Addage Plast AP 251 is a high-quality construction plasticizer by Sakshi Chem Sciences, the leading manufacturer of top-end construction chemicals.
The Addage Plast AP 251 is a plasticizer for pumpable concrete with a sulphonated naphthalene base. It is widely used for different purposes by blending with ready-mix concrete. It is helpful to reduce water retention of the material by 15%-20%, without compromising workability. The product is also designed to reduce risks of bleeding and segregation, by providing highly cohesive concrete mix.
Addage Plast AP 251 is an excellent solution for water-proofing concrete or cement surfaces. It does not contain chloride, which makes AP 251 perfect for use with RCC. In addition, Addage Plast is compatible for use with all types of Portland cement, including RCC or slag.
Applications of Addage Plast AP 251
Addage Plast AP 251 by Sakshi Chem Sciences Pvt. Ltd. is made for –
- Enhancing fluidity of concrete
- Improves workability of cement-based surfaces
ADDAGE PLAST AP 430
Brand Addage Form Liquid Uses Construction Packaging Size 60 Kg, 250Kg Packaging Type Can, Barrel Minimum Order Quantity 60 Kg Product Description- PLAST AP 430
Addage PLAST AP 430 is a plasticizing and water-proofing concrete produced by the renowned construction compound brand. It is a sulphonate naphthalene based concrete admixture and widely used around the world for strong and durable construction.
Addage PLAST AP 430 works to improve the characteristics of water content in a concrete mix. It is also used to produce high quality pumpable concrete, without compromising on strength. It also promotes high early and final strengths of the concrete by lowering water level.
PLAST AP 430 by Addage has significant advantages, such as allowing you to create concrete with reduced cement content, or increased fluidity.
Application of Addage PLAST AP 430
Addage PLAST AP 430 is commonly used to:
- Improve effectiveness of water content in concrete mix
- Produce pumpable concrete
- Create high workability concrete
- Make high strength and high grade concrete M 35
- Ensure low permeability and high early strength in concrete mix
ADDAGE PLAST AP 501
Brand Addage Form Liquid Uses Construction Packaging Size 60 Kg, 250 Kg Packaging Type Can, Barrel Minimum Order Quantity 60 Kg Product Description
Addage Plast AP 501 by Sakshi Chem Sciences Pvt. Ltd. is extremely beneficial. It provides specified strength grades that enhance workability and reduce cement content in the concrete mix. It ultimately produces low permeable concrete to enhance overall durability.
Plast AP 501 by Addage minimizes the risk of segregation and water bleeding. It also helps to produce a denser, close-textured concrete surface which helps to enhance comprehensive durability.
Addage Plast AP 501 is chloride-free. This makes it immensely safe for use in pre-stressed concrete. It also makes it safer for use with sulfate resisting cements and against marine aggregates. Plast AP 501 can be used with all types of cement, except high-alumina cement.
Applications of Addage Plast AP 501
Addage Plast AP 501 by Sakshi Chem Sciences is most useful for –
- Improving effectiveness of pumpable concrete
- Producing high-strength pumpable concrete
- Enhance early and ultimate strength of concrete
- High workable cement and concrete
